Zafferani Centrifugal Drum Systems
The Centrifugal sludge-water separator has been designed to physically removal the glass fines from process water waste, this in turn helping the environment costs to the company and helps improve the life of the machines.
Suitable for direct connection to Edger’s, Bevellers and CNC machines.
THE SYSTEM DOES NOT USE CHEMICAL AGENTS
PROLONGS PERIODIC CLEANING OF THE MACHINE WATER TANKS .
HELPS TO AVOID BLOCKING OF WATER PIPES, TUBES AND BRUSHES
INCREASE THE LIFE OF THE MACHINES AND REDUCES THE NEED FOR MAINTENANCE DUE TO GLASS FINES
INCREASE THE LIFE OF DIAMOND AND POLISHING WHEELS
OBTAINS BETTER POLISHING RESULTS
The Machine operation:
Processed water is pumped to the rotating drum inside the separator by a dedicated submersible pump included with the system, the glass fines suspended in the fluid are “pushed” against the aluminium drum walls by the effect of the centrifugal force, letting the purified water flow back out of the system and returning to the machines water tank.
After some time, depending on the volumes processed, the operator stops the separator to take out the glass sludge inside of the aluminium drum. Once opened the separator is protected by a sensor opening system that allows opening only after a few minutes so that the drum has ample time to stop.
Dimensions: 500 x 970 x H = 900 mm.
Weight: 150 Kg.
Power: 2 Kw
Max Flow rate: 100 lt/min
Rotor volume: 16 lt
Sludge MAX capacity: 8 Kg
Removed Glass Sludge per hour : 6 Kg/hour (the equivalent to around 5 hours of edging 6 mm glass with one mm glass removal)
Particle MAX acceleration:1250 g
Particle min size: 5 micro