Sandblasting

Manual SandBlasting

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Suction sandblasting unit The suction sandblasting unit, SANDER FP 101 model, is a machine equipped with a special “brush head” which is able to sandblast and instantaneously recover the abrasive material utilized.

Sturdy construction.
Built-in dust filter, made up of a special filtering sleeve for filtering dusts generated by sandblasting operations.
System for the recovery and recycling of abrasive material.
20-litre capacity container for the abrasive material, equipped with a specific drawing element for supplying the abrasive material to the sandblasting gun.
High-performance sandblasting gun, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Noise level complying with regulations.
Machinery complying with EC norms.

SPECIFICATIONS

	Total power	1,2 Kw
	Weight	40 Kg 88 lbs
	Dimensions L x P x H	500 mm / 19 ^1/2” 500 mm / 19 ^1/2” 900 mm / 35 ^1/2”
	Compressed air consumption	300-400 lit/min

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Manual sandblasting cabin with built-in self-cleaning filter.

Entry and exit glass supports, each of 400 mm. length.
Nylon rollers for the manual moving of the glass plate.
Silencer on the exhaust stack.

Optional:

400 mm diameter swivel table.

SPECIFICATIONS

	Max. glass size	860 mm 34“
	Glass thickness	1 > 50 mm 1/2” > 2”
	Total power	1,2 Kw
	Weight	335 kg 740 lbs
	Dimensions L x P x H	1720 mm/67” 1150 mm/45” 2200 mm/86”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun	1

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration.. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine, for filtering the dust generated by the sandblasting process. The dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out by the operator on the filter consists in the periodic emptying of the above-mentioned containers. This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which is therefore recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum protection of the glass during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee the optimum sealing off of dust.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting gun, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Noise level complying with regulations.
Machinery complying with EC norms.

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Manual sandblasting cabin with built-in self-cleaning filter

Entry and exit glass supports, each of 1.400 mm. length.
Automatic 4.000 mm long conveyor belt.
The conveyor belt is lined with a special wear proof and cut proof material.
Silencer on the exhaust stack.

Optional:

400 mm diameter swivel table.
1.400 mm module for extending the glass entry and/or exit support.

SPECIFICATIONS

	Max. glass size	1200 mm 47“
	Glass thickness	1 > 50 mm 1/2” > 2”
	Total power	1,5 Kw
	Weight	600 kg 1322 lbs
	Dimensions L x P x H	4050 mm/159” 1450 mm/57” 2350 mm/92”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun	1

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration.. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine, for filtering the dust generated by the sandblasting process. The dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out by the operator on the filter consists in the periodic emptying of the above-mentioned containers. This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which is therefore recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum protection of the glass during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee the optimum sealing off of dust.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting gun, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Noise level complying with regulations.
Machinery complying with EC norms.

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Manual sandblasting cabin with built-in self-cleaning filter.

Entry and exit glass supports, each of 800 mm. length.
Manual conveyor belt (3,000 mm length) equipped with nylon rollers for the manual moving of the glass plate..
Silencer on the exhaust stack.

Optional:

400 mm diameter swivel table.

SPECIFICATIONS

	Max. glass size	1200 mm 47“
	Glass thickness	1 > 50 mm 1/2” > 2”
	Total power	1,2 Kw
	Weigh	600 kg 1322 lbs
	Dimensions L x P x H	3000 mm/118” 1450 mm/57” 2350 mm/92”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun	1

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration.. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine, for filtering the dust generated by the sandblasting process. The dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out by the operator on the filter consists in the periodic emptying of the above-mentioned containers. This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which is therefore recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum protection of the glass during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee the optimum sealing off of dust.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting gun, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Noise level complying with regulations.
Machinery complying with EC norms.

Automatic Sandblasting

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Automatic – manual, numeric-control sandblasting cabin

Entry and exit glass supports, each of 1.400 mm. length.
Automatic 4.000 mm long conveyor belt.
The belt of the conveyor is lined with a special wear proof and cut proof material.
Stepped movement of the glass plate (the step is programmable according to the type of sandblasting to be implemented).
The glass plate movement can be set with a continuous motion.
Silencer on the exhaust stack.

Optional:

1.400 mm. module for the lengthening of the entry and/or exit support.

SPECIFICATIONS

	Speed	1m² = 4-5 min
	Min. glass size	200 x 200 mm 8” x 8“
	Max glass size	1200 mm 47“
	Glass thickness	1 > 50 mm 1/2” > 2”
	Total power	2 Kw
	Weight	700 kg 1543 lbs
	Dimensions L x P x H	4050 mm /159 ^1/2” 1450 mm/ 57” 2350 mm/92 ^1/2”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun - automatic gun	1 1
	Software specifications	Z120
	- N° of programmable areas on the same glass plate	1
	- Deeply Engraved and light sandblasting	•
	- Shaded sandblasting
	- Y-axis repetition	1 > 99
	- N° of storable programs	1
	- Gun speed management	•

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine for filtering the dust generated by the sandblasting process. This dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out on the filter by the operator consists in the periodic emptying of the abovementioned containers.
This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Keyboard-equipped control panel + display. Easy and speedy elaboration of the programming of working cycles to be carried out, thanks to the special and exclusive program (developed by the Fratelli Pezza team) which guides the operator step by step.
As a consequence, software knowledge is not required of the operator in order for the above-mentioned program to be utilized. Training time for any workman to learn the program: 10-20 minutes.
The new program, which was recently updated and made available in multiple languages, makes it possible to:
- implement an infinite variety of sandblasting types (normal, light, Engraved) all in a completely automatic way.
Light sandblasting: the intensity of the sandblasting can be adjusted
Engraved sandblasting: the incision depth can be adjusted
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which therefore is recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum glass protection during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee optimum sealing off of dust.
Possibility of double operation: automatic or by operator thanks to the manual gun positioned on the right-hand side of the machine.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting guns, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Special hard-metal guard to protect conveyor belt.
Air-jet nozzle (applied to the glass exit area) for the cleaning of the conveyor belt.
Noise level complying with regulations.
Machinery complying with EC norms.
Possibility of applying Amacor dies for the automatic implementation of drawings and stripes.

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Automatic – manual, numeric-control sandblasting cabin

Entry and exit glass supports, each of 1.400 mm. length.
Automatic 4.000 mm long conveyor belt.
The belt of the conveyor is lined with a special wear proof and cut proof material.
Stepped movement of the glass plate (the step is programmable according to the type of sandblasting to be implemented).
The glass plate movement can be set with a continuous motion.
Silencer on the exhaust stack.

Optional:

1.400 mm. module for the lengthening of the entry and/or exit support.

SPECIFICATIONS

	Speed	1m² = 4-5 min
	Min. glass size	200 x 200 mm 8” x 8“
	Max glass size	1800 mm 71“
	Glass thickness	1 > 50 mm 1/2” > 2”
	Total power	2 Kw
	Weight	850 kg 1885 lbs
	Dimensions L x P x H	4050 mm /159 ^1/2” 1680 mm/66” 2610 mm/103”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun - automatic gun	1 1
	Software specifications	Z180
	- N° of programmable areas on the same glass plate	1 > 30
	- Deeply Engraved and light sandblasting	•
	- Shaded sandblasting	•
	- Y-axis repetition	1 > 99
	- N° of storable programs	1
	- Gun speed management	•

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine for filtering the dust generated by the sandblasting process. This dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out on the filter by the operator consists in the periodic emptying of the abovementioned containers.
This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Keyboard-equipped control panel + display. Easy and speedy elaboration of the programming of working cycles to be carried out, thanks to the special and exclusive program (developed by the Fratelli Pezza team) which guides the operator step by step.
As a consequence, software knowledge is not required of the operator in order for the above-mentioned program to be utilized. Training time for any workman to learn the program: 10-20 minutes.
The new program, which was recently updated and made available in multiple languages, makes it possible to:
- implement an infinite variety of sandblasting types (normal, light, Engraved) all in a completely automatic way.
Light sandblasting: the intensity of the sandblasting can be adjusted
Engraved sandblasting: the incision depth can be adjusted
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which therefore is recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum glass protection during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee optimum sealing off of dust.
Possibility of double operation: automatic or by operator thanks to the manual gun positioned on the right-hand side of the machine.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting guns, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Special hard-metal guard to protect conveyor belt.
Air-jet nozzle (applied to the glass exit area) for the cleaning of the conveyor belt.
Noise level complying with regulations.
Machinery complying with EC norms.
Possibility of applying Amacor dies for the automatic implementation of drawings and stripes.

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Automatic manual, numeric-control sandblasting cabin

Entry and exit glass supports, each of 1.400 mm. length.
Automatic 4.000 mm long conveyor belt.
The belt of the conveyor is lined with a special wear proof and cut proof material.
Stepped movement of the glass plate (the step is programmable according to the type of sandblasting to be implemented).
The glass plate movement can be set with a continuous motion.
Silencer on the exhaust stack.

Optional:

1.400 mm. module for the lengthening of the entry and/or exit support.

SPECIFICATIONS

	Speed	1m² = 4-5 min
	Min. glass size	200 x 200 mm 8” x 8“
	Max glass size	1200 mm 47“
	Glass thickness	1 > 50 mm 1/2” > 2”
	Total power	2 Kw
	Weight	700 kg 1543 lbs
	Dimensions L x P x H	4050 mm /159 ^1/2 1450 mm/ 57” 2350 mm/92 ^1/2”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun - automatic gun	1 1
	Software specifications	120V
	- N° of programmable areas on the same glass plate	1 > 30
	- Deeply Engraved and light sandblasting	•
	- Shaded sandblasting	•
	- Y-axis repetition	1 > 99
	- N° of storable programs	1 > 30
	- Gun speed management	•

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine for filtering the dust generated by the sandblasting process. This dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out on the filter by the operator consists in the periodic emptying of the above-mentioned containers.
This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Keyboard-equipped control panel + display. Easy and speedy elaboration of the programming of working cycles to be carried out, thanks to the special and exclusive program (developed by the Fratelli Pezza team) which guides the operator step by step. As a consequence, software knowledge is not required of the operator in order for the above-mentioned program to be utilized. Training time for any workman to learn the program: 10-20 minutes.
The new program, which was recently updated and made available in multiple languages, makes it possible to:
- program up to 30 sandblasting areas (even with qualitative elements differing from one another) on the same glass plate.
- implement an infinite variety of sandblasting types (normal, light, Engraved and shaded) all in a completely automatic way.
Light sandblasting: the intensity of the sandblasting can be adjusted
Engraved sandblasting: the incision depth can be adjusted
Shaded sandblasting: shading length can be varied
- Save and store up to 30 work programs that can therefore be repeated by simply recalling the number of the program that one intends applying.
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which therefore is recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum glass protection during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee optimum sealing off of dust.
Possibility of double operation: automatic or by operator thanks to the manual gun positioned on the right-hand side of the machine.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting guns, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Special hard-metal guard to protect conveyor belt.
Air-jet nozzle (applied to the glass exit area) for the cleaning of the conveyor belt.
Noise level complying with regulations.
Machinery complying with EC norms.
Possibility of applying Amacor dies for the automatic implementation of drawings and stripes.

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Automatic manual, numeric-control sandblasting cabin

Entry and exit glass supports, each of 1.400 mm. length.
Automatic 4,000 mm long conveyor belt. The belt of the conveyor is lined with a special wear proof and cut proof material.
Stepped movement of the glass plate (the step is programmable according to the type of sandblasting to be implemented). The glass plate movement can be set with a continuous motion.
Silencer on the exhaust stack.

Optional:

Second automatic gun to increase the operation speed.
1.400 mm. module for the lengthening of the entry and/or exit support.

SPECIFICHE TECNICHE

	Speed	1m² = 4-5 min
	Min. glass size	200 x 200 mm 8” x 8“
	Max glass size	1800 mm 71“
	Glass thickness	1 > 50 mm 1/2" > 2"
	Total power	2 Kw
	Weight	850 kg 1885 lbs
	Dimensions L x P x H	4050 mm /159^1/2 1680 mm/ 66” 2610 mm/130”
	Compressed air consumption	600 lit/min
	Number of sand-blasting guns (standard): - manual gun - automatic gun	1 1
	Software specifications	180V
	- N° of programmable areas on the same glass plate	1 > 30
	- Deeply Engraved and light sandblasting	•
	- Shaded sandblasting	•
	- Y-axis repetition	1 > 99
	- N° of storable programs	1 > 30
	- Gun speed management	•

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine for filtering the dust generated by the sandblasting process. This dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out on the filter by the operator consists in the periodic emptying of the above-mentioned containers.
This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Keyboard-equipped control panel + display. Easy and speedy elaboration of the programming of working cycles to be carried out, thanks to the special and exclusive program (developed by the Fratelli Pezza team) which guides the operator step by step. As a consequence, software knowledge is not required of the operator in order for the above-mentioned program to be utilized. Training time for any workman to learn the program: 10-20 minutes.
The new program, which was recently updated and made available in multiple languages, makes it possible to:
- program up to 30 sandblasting areas (even with qualitative elements differing from one another) on the same glass plate.
- implement an infinite variety of sandblasting types (normal, light, Engraved and shaded) all in a completely automatic way.
Light sandblasting: the intensity of the sandblasting can be adjusted
Engraved sandblasting: the incision depth can be adjusted
Shaded sandblasting: shading length can be varied
- Save and store up to 30 work programs that can therefore be repeated by simply recalling the number of the program that one intends applying.
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which therefore is recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum glass protection during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee optimum sealing off of dust.
Possibility of double operation: automatic or by operator thanks to the manual gun positioned on the right-hand side of the machine.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting guns, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Special hard-metal guard to protect conveyor belt.
Air-jet nozzle (applied to the glass exit area) for the cleaning of the conveyor belt.
Noise level complying with regulations.
Machinery complying with EC norms.
Possibility of applying Amacor dies for the automatic implementation of drawings and stripes.

sandblasting
NORMAL

sandblasting
DEEP ENGRAVED SLOPING

sandblasting
DEEP ENGRAVED

sandblasting
SHADING

sandblasting
VARIABLE SHADING

sandblasting
LIGHT

sandblasting
DECORATIVE

Automatic manual, numeric-control sandblasting cabin

Entry and exit glass supports, each of 3.000 mm. length.
Automatic 7.000 mm long conveyor belt.
The 2 conveyor belts are lined with a special wear proof and cut proof material.
Stepped movement of the glass plate (the step is programmable according to the type of sandblasting to be implemented).
The glass plate movement can be set with a continuous motion.

Optional:

1.400 mm. module for the lengthening of the entry and/or exit support.

SPECIFICATIONS

Speed	1m²= 2 min
Min. glass size	200 x 200 mm 8” x 8“
Max glass size	2600 mm 102“
Glass thickness	1 > 50 mm 1/2” > 2”
Total power	3 Kw
Weight	macchina: 1400 kg /3086 lbs	filtro: 300 kg / 661 lbs
Dimensions L x P x H	macchina: 7160 mm /282” 1350 mm /53” 3430 mm /135”	filtro: 760 mm/30” 760 mm/30” 3300 mm/130”
Compressed air consumption	1800 lit/min
Number of sand-blasting guns (standard): - manual gun - automatic gun	1 3
Software specifications	260V
- N° of programmable areas on the same glass plate	1 > 30
- Deeply Engraved and light sandblasting	•
- Shaded sandblasting	•
- Y-axis repetition	1 > 99
- N° of storable programs	1 > 30
- Gun speed management	•

Features

Sturdy construction.
Spray kiln treatment guaranteeing high quality and long-term duration. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine for filtering the dust generated by the sandblasting process. This dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 4.000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out on the filter by the operator consists in the periodic emptying of the above-mentioned containers.
This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
Keyboard-equipped control panel + display. Easy and speedy elaboration of the programming of working cycles to be carried out, thanks to the special and exclusive program (developed by the Fratelli Pezza team) which guides the operator step by step. As a consequence, software knowledge is not required of the operator in order for the above-mentioned program to be utilized. Training time for any workman to learn the program: 10-20 minutes.
The new program, which was recently updated and made available in multiple languages, makes it possible to:
- program up to 30 sandblasting areas (even with qualitative elements differing from one another) on the same glass plate.
- implement an infinite variety of sandblasting types (normal, light, Engraved and shaded) all in a completely automatic way.
Light sandblasting: the intensity of the sandblasting can be adjusted
Engraved sandblasting: the incision depth can be adjusted
Shaded sandblasting: shading length can be varied
- Save and store up to 30 work programs that can therefore be repeated by simply recalling the number of the program that one intends applying.
Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which therefore is recovered and returned to the work cycle in a completely automatic mode.
External and internal supports equipped with special bristled rings for maximum glass protection during the production process, thus avoiding possible scratches, scoring, etc.
Coating of the irradiated wall with abrasion-resistant rubber.
“Circular” rubber sealers on the side apertures in order to guarantee optimum sealing off of dust.
Possibility of double operation: automatic or by operator thanks to the manual gun positioned on the right-hand side of the machine.
Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
High-performance sandblasting guns, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
Special hard-metal guard to protect conveyor belt.
Air-jet nozzle (applied to the glass exit area) for the cleaning of the conveyor belt.
Noise level complying with regulations.
Machinery complying with EC norms.
Possibility of applying Amacor dies for the automatic implementation of drawings and stripes.